How to Assemble the RL-1 Rolling Shower Chair in 5 Minutes (Step-by-Step Video Guide)
Watch the full RL-1 Rolling Shower Chair assembly video below. This tool-free shower chair can be assembled in about five minutes.
Step-by-Step RL-1 Rolling Shower Chair Assembly
The RL-1 Rolling Shower Chair is designed for quick tool-free assembly and can typically be set up in about five minutes.
Follow the steps below to assemble the chair safely and correctly.
Step 1: Open the Box and Remove Components
Carefully open the shipping box and remove all components. Place the parts on a clean, flat surface so everything is easy to access.
Step 2: Attach the Backrest
Position the backrest onto the rear frame posts of the chair.
Step 3: Secure the Backrest with Clamps
Use the two provided clamps to secure the backrest firmly to the frame. Ensure both clamps are properly tightened so the backrest is stable.
Step 4: Secure the Mesh Backrest
Attach the mesh backrest support using the integrated buckle strap. Tighten the buckle so the mesh backrest is properly tensioned.
Step 5: Secure the Front Posts
Use the two vinyl securing straps to fasten the front posts to the frame. These straps help keep the chair frame rigid and stable during use.
Step 6: Insert the Commode Pail
Slide the commode pail underneath the seat opening until it is properly seated in the holder.
Step 7: Attach the Seatbelt
Secure the seatbelt to the back posts of the chair. Make sure the belt is properly attached and can be adjusted for user safety.
Assembly Complete
Once these steps are finished, check that:
- All clamps and straps are secure
- The seatbelt is properly attached
- The commode pail is positioned correctly
Your RL-1 Rolling Shower Chair is now ready for use.
